Craftsman Snowblower Not Starting – Let’s Discover The Reasons

Snowblower is such an important invention, especially for the areas where winters are severe and remains for longer durations.

Users may get upset when the Craftsman snowblower does not start properly and may not work.

The article below will cover all the possible problems that could stop the snowblower from working effectively and their potential solutions.

Some prominent reasons behind a non-working snowblower could be; a lousy starter can cause trouble, low voltage issues, wrong or damaged spark plug, old or insufficient fuel, the engine overly primed, problems with the fuel tank, and accumulation of dust and debris in the carburettor.

Craftsman Snowblower Not Starting

Craftsman snowblower not starting is a concern for many. The article below will cover all the possible problems with their potential solutions in detail so that users may be aware of the issues that can happen to their snow blowers and must know the timely answers to avoid panic situations.

The main problems that can occur to snowblower and hinders the starting of the blower includes; a bad electric starter, problems with the fuel tank, use of old or wrong fuel, issues with the spark plug, dust or debris in the carburettor, excessively primed engine, problems with operating and starting of the engine and blockage in the fuel tank.

Some Common Issues Your Craftsman Snowblower May Have

Bad Electric Starter

Snow Blowers take electricity to get started and work properly; when there seems to be an issue while jumping, the first problem that could have happened with the blower is a problem with the electric starter.

Starter may not be working or could have been diffused, which requires replacement.

Solution

To check whether the issue lies with the electric starter or not, one must match it with the help of a multimeter. If there is an issue, then it should be replaced as soon as possible.

Bad Recoil In A Pull Start Model

Not all snowblowers are electric, and some are manual, with a revolving system for getting started.

Though they may become problematic when the rope is pulled, the snowblower refuses to start if it’s done with extra hardness.

Solution

This can lead to breakage of the spring, which should be replaced, and again an effort should be made to start the blower by pulling the cord with a soft hand.

However, if the starter still doesn’t work, some other components, along with the spring, must be replaced.

Blockage In Fuel Line

At times, fuel lines can stop the working of a snowblower when an old or wrong fuel gets stuck in the bar and works the hurdle.

Moreover, a leaked fuel line can also stop the working of the snowblower. In such circumstances, it is essential to clear the fuel line first, then add more fuel to start the snowblower.

Solution

To check whether the fuel line has a leakage issue, the user should keep the fuel line pump in the container and start pouring more fuel into it; this will clearly show any leakage.

Moreover, in the same way, any blockage can be detected when the power starts to get stuck in the line, which means there is a blockage inside the tube that needs to be cleared first.

Clear the fuel line with the help of carburettor cleaner and by blowing inside the bar, which will remove all the debris, grease, and gummy particles from the tank.

And in case of a leaked pump, the user must replace the fuel line with the new one.

Issues With Spark Plug

Multiple issues can happen with the spark plug, which then causes trouble while starting the snowblower.

Possible problems with the spark plug include; heavy dirt and debris in the pin, which results in the non-working of the spark plug.

If the plug is not fitted correctly or may not be getting enough energy to work, then it can also cause problems in starting the snowblower.

Solution

Check the plug properly and look for any issue, which includes; dirt, dust, or any other breakage to the pin which restricts the activity of the hook.

Do replace the plug with the new one immediately if the plug seems to be irreparable.

The engine Must Be Primed.

Priming the engine is a good thing when the fuel lines get blocked and are not working correctly. Priming the fuels means they put extra power into the fuel line, which will prime up the engine and make it faster to perform.

But this should be done carefully as, at times, priming may not be required and may cause an excess of fuel inside the tank.

Solution

Use the primer bulb and get to know if priming the engine is required or not. Excessively fueling the machine can also cause trouble and may lead to flooding in the engine.

Dust And Debris In Carburetor

Carburetor is an essential component as it controls the air and fuel activity.

At times, dust or debris accumulates in the carburettor, which hinders the working of the carburettor, and in return, the fuel and air activity also gets disturbed.

This is why it is essential to make the carburettor clear and timely.

Solution

Dust and debris must be removed from the carburettor, and a carb cleaner should be used for the final cleaning.

Below is the overview of some simple steps which should be followed for better cleaning of the carburettor;

Craftsman Snow Blower Won’t Start

• Open up the carburettor with the help of pliers, screwdriver and ratchets
• Do take a picture while carburettor the carburettor as it will help later in reassembling
• Clear out all the dust and debris, and for the final touch, use carb cleaner
• Now after deep cleansing, reassemble the carburettor

Not Operating Or Starting Properly

Snowblower is used only in winter, so after a complete season of summers, it may become challenging to resume using it cocorrectlyUsers may find it difficult to operate or start the snowblower again.

Solution

The solution to this is pressure starting the blower, which can be done by turning on the blower with the ignition switch.

The blower must be placed on a full throttle mode and slowly reduce this from full throttle to ¾ of throttle mode.

Fuel Issues

No one operates their snowblower without fuel or gas. Still, it’s just a reminder that one should check the tank to see if there is enough gas to operate the blower, mainly when the blower is being used after the considerable interval of the summer.

The right amount and fuel type are essential to be used. They can affect the components and working of the snowblower.

Solution

Do read the instructions manual to understand better the type of fuel that must be used in the blower.

Preferably the one with less than 10% ethanol is preferred, and a high-octane fuel is always preferable to be used in a snowblower.

Craftsman Snowblower Won’t Start - Troubleshooting - Small Engine Repai

Conclusion

The article above illustrates detailed reasoning regarding the craftsman snowblower not starting.

After reading the above information, a conclusion can be drawn that multiple reasons contribute to the cause, which precisely includes; a bad electric starter, bad recoil in a pull start model, issues with the spark plug, blockage in the fuel line, and engine overly primed and gets flooded.

All these are not significant issues but can be resolved if detected and solved on time.

Most of them can be determined by the user at home, but some problems that merely contain the electricity part must be discussed with an expert, or professional help must be sought.